陽極氧化鋁油墨

【一、使用技術說明】

1.產品特性：平光、免固化劑、免洪烤、快干、耐沖壓、可絲印及移��；

2.環保性:符合歐洲重金屬EN-71-3、 美國ASTM-963、歐盟ROHS、鄰苯二甲酸鹽6P等標準；

3.適用范圍:各種金屬、合金、玻璃、陶瓷、電鍍、石材、陽極氧化鋁表面及烤 （噴）漆面等；

4.稀釋劑: 用本公司783稀釋劑。洗網用718洗網水；

5.網紗與用量: 適合77T-140T（180目-350目）網紗，用300目網版每公斤約可印30平方米；

6.固化劑: 可以提高油墨油附著力及性能。本油墨單組份使用,不用添加.如有特殊要求可以加本公司TA-9固化劑,添加量10%；

7.干燥方法：自然揮發干燥，墨層表干時間5-10分鐘：實干時間24小時以?xún)�，也可�?0度烤15分鐘。

【二、性能測試方法】

【三、使用注意事項】

1、試印確認符合要求后再批量生產。

2、做好被印物的表面清除油脂及雜質工作，以促進附著效果。

3、需要套色時，應在前顏色表干或硬干后再進行套色工作。

4、附著力、硬度、耐酸性、耐油性、耐去漬油性、抗劃傷性、耐磨性等性能的檢測，需要墨層

完全固化后方可檢測。

5、未經允許情況下，不得將本系列油墨與其它類型油墨混用及配色。

6、添加固化劑后的使用時限：加入固化劑后的油墨使用時間為4-6小時，環境溫度越高使用時間越短，剩余油墨不可回收。

7、油墨，稀釋劑使用及儲存時嚴禁煙火。

8、使用時注意施工場所的通風狀況良好。

[technical instructions]

1. product characteristics: Pingguang, free curing agent, baking, drying, non flood resistant stamping, screen printing and printing;

2. environmental protection: in line with the European heavy metals EN-71-3, the United States ASTM-963, the European Union ROHS, phthalate two, formic acid, 6P and other standards;

3. scope of application: all kinds of metals, alloys, glass, ceramics, electroplating, stone, anodized aluminum surface and baking (spraying) paint, etc.;

4. thinner: use our company's 783 thinner. Wash the net with 718 net water;

5. mesh and dosage: for 77T-140T (180 -350 mesh) mesh, 300 mesh screen can be printed per kilogram of about 30 square meters;

6. curing agent: can improve ink oil adhesion and performance. The ink component use, do not add. If there are special requirements can be added to this TA-9 curing agent, adding amount of 10%;

7. drying method: natural evaporation drying, ink table drying time of 5-10 minutes: solid time less than 24 hours, you can also bake 80 degrees 15 minutes.

drying temperature

25 C

60 C

80 C

100 C

drying time

24 hours

40 minutes

20 minutes

15 minutes

[two] methods of performance test]

Inspection item

Test condition

Test result

Adhesion scale

After scaling, peel off at least 3 times with 3M tape

100% without peeling off

Alcohol tolerance test

With a cotton ball impregnated with 99% alcohol, the 500G force is wiped back and forth 100 times on the surface of the ink

unchanged

Stamping test

1MM aluminum sheet bending 180 degrees

unchanged

[three, the use of attention]

1, test printing confirmed compliance with the requirements, and then mass production.

2, do a good job of printing the surface of the oil and impurities to remove the work to promote the adhesion effect.

3, need to register, should be before the color table dry or hard after the registration work.

4, adhesion, hardness, acid resistance, oil resistance, resistance to oil stains, scratch resistance, abrasion resistance and other properties of the test, you need ink layer

Fully solidified before inspection.

5, without permission, shall not use this series of ink mixed with other types of ink and color matching.

6, add curing agent after the use of time limit: the use of curing agent after the use of ink for 4-6 hours, the higher the ambient temperature, the shorter the use time, the remaining ink can not be recycled.

7, ink, diluent use and storage is strictly prohibited fireworks.

8, the use of attention to the construction site ventilation in good condition.

上海凱賢印刷科技有限公司是一家以油墨生產.印刷耗材貿易.印刷加工為一體的公司。凱賢科技公司座落在交通便利的嘉定安亭鎮，緊靠F1全部賽車場。公司占地面積10000平方米，是一家以研制、生產高品質油墨為實體，同時經營各類相關輔助器材的科工貿整體化大型企業。以ISO9001質量認證體系為基礎，以歐美EN-71PART3、日本ST-MARK、美國ASTM檢測體系為標準，生產適用于絲印、移印、膠印、噴涂等工藝系列油墨產品，為電子電器、紡織服裝、日用制品、文體用品、包裝印刷、廣告展示、玩具業等國內外眾多行業領域的有名品牌運營商提供服務，備受著業界的信賴與推崇。凱賢科技在新時期確立了新的發展戰略，提出了“科研先導，人才運營，整合資源，創(chuàng )新經營”的企業經營方略。與國內外先進油墨技術研究機構建立戰略合作伙伴關系，在不斷提高完善現有產品質量的同時，致力于新產品的研制開發。同時完善企業運營機制，積較吸納各類人才，建立效率高、和諧、熱忱、專注的顧問型服務團隊，運用行之有效的營銷、管理策略，增強了企業與客戶的可持續發展動力與優勢。 作為中國絲網印刷行業協的會(huì )單位和中國網印及制像協會(huì )的成員，凱賢科技深深感受到自己肩負著推動中國絲網印刷、制像事業走高速健康發展道路的歷史使命。凱賢人決心籍著自身綜合實力，結合各界有效資源，在：“、承諾”的企業核心價值理念的指引下，堅持耕耘，一直進步著，為創(chuàng )建“行業品牌”而奮進！